Follow us
Home > Products > low esr tantalum capacitor

low esr tantalum capacitor

  • 185℃ High Temperature Tantalum Capacitors CA502

    Contact Now 185℃ High Temperature Tantalum Capacitors CA502 185℃ High Temperature Tantalum Capacitors CA502 ● Silver case, gas seal, Cylindrical, Axial leads, High temperature sleeve, Polar ● Good electric performance, High reliability, long life, Low DF and LC. ● High temperature performance, Can use at 185 ℃ ● Suit for oil drilling deep well...

  • Axial Solid Tantalum Capacitors CA

    Contact Now Axial Solid Tantalum Capacitors CA Axial Solid Tantalum Capacitors CA

  • SMD Aluminum Electrolytic Capacitors Low Leakage SA5

    Contact Now SMD Aluminum Electrolytic Capacitors Low Leakage SA5 SMD Aluminum Electrolytic Capacitors Low Leakage SA5

  • Power Mixture Tantalum Capacitor THC2

    Contact Now Power Mixture Tantalum Capacitor THC2 High Energy Tantalum Hybrid Capacitor power mixture tantalum capacitor THC2

  • Surface Mount Tantalum Capacitors -SMD CA45

    Contact Now Surface Mount Tantalum Capacitors -SMD CA45 SMD Chip Tantalum Capacitors CA45 Introduction The CA45 Series is tantalum chip capacitor suitable For SMT electric board used for telecommunication computer camcorder and mobile phone set and so on Low ESR value conform with EIA535BAAC Size: Tape and Reeled per EIA481-1 SMD...

  • Low ESR Aluminum Electrolytic Capacitor CD286

    Contact Now Low ESR Aluminum Electrolytic Capacitor CD286 Aluminum electrolytic capacitor (also called electrolytic capacitor) is how to achieve high electric capacity? First of all, to increase the plate area effectively, increase the plate in the electrolytic capacitor effective area method is that its anode aluminum foil corrosion is very rough, corrosion foil or tantalum metal powder caking structure to increase the surface area as possible, but only by increasing the positive surface area of the rough and metal anode in fact does not increase the plate effective area, only the cathode substrate as rough as the anode and the surface of the two electrodes is closely to realize effective increase of plate area, which in fact is not possible.