Follow us
Home > Products > electrolytic capacitor smd

electrolytic capacitor smd

  • Non-Polarized Aluminum Electrolytic Capacitors

    Contact Now Non-Polarized Aluminum Electrolytic Capacitors Non-Polarized Aluminum Electrolytic Capacitors

  • Lugs Type Aluminum Electrolytic Capacitors CD17

    Contact Now Lugs Type Aluminum Electrolytic Capacitors CD17 Lugs Type Aluminum Electrolytic Capacitors CD17 CASE SIZE TABLE Unit:mm Lugs Type Aluminum Electrolytic Capacitors CD17.pdf

  • Aluminum Electrolytic Capacitors Long Life 8000Hours CD11GA

    Contact Now Aluminum Electrolytic Capacitors Long Life 8000Hours CD11GA Among various kinds of capacitors, but the aluminum electrolytic capacitor life problems.Usually of aluminium electrolytic capacitor life throughout the evaluation is based on the electric capacity drops below 80% of the rated (initial value), the electric capacity first is the direct cause of aluminum electrolytic capacitor electrodes of the actual area is reduced.Among them, the anode area in use process is not likely to reduce, reduce is the cathode.Cathode by the electrolyte is the actual size of the warranty, if the electrolyte due to volatile reduce will cause actual area of the cathode.So you can think because the end of the service life of aluminum electrolytic capacitor electrolyte waving hair, then what are the reasons cause the volatilization of the electrolyte?

  • Screw Terminal Aluminium Electrolytic Capacitors HCGF5A

    Contact Now Screw Terminal Aluminium Electrolytic Capacitors HCGF5A Jinpei as a professional screw electrolytic capacitor manufacturers and over 30years of screw electrolytic capacitor experience, has always been committed to the capacitor field of high and new technology R&D, Jinpei actively contact clients in different areas, involved in instrument, LED, audio, power supply, electronic toys, security, digital camera, microelectronics, oil drilling, solar energy, new energy vehicles, communications, military spaceflight etc.

  • SMD Metallized PPS Film Capacitors SF2

    Contact Now SMD Metallized PPS Film Capacitors SF2 SMD Metallized PPS Film Capacitors SF2

  • Lug Or Screw Terminal Aluminium Electrolytic Capacitors CD92

    Contact Now Lug Or Screw Terminal Aluminium Electrolytic Capacitors CD92 Lug or terminal terminal electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.

  • Surface Mount Aluminum Electrolytic Capacitors SA1

    Contact Now Surface Mount Aluminum Electrolytic Capacitors SA1 Surface Mount Aluminum Electrolytic Capacitors SA1

  • Aluminum Electrolytic Capacitors Long Life CD11GE

    Contact Now Aluminum Electrolytic Capacitors Long Life CD11GE Good application in electrical and electronic devices to aluminum electrolytic capacitor is dealing with the performance of the aluminum electrolytic capacitor has more fully understand, in front of each section has been compared most performance of aluminum electrolytic capacitor are introduced in detail.In the application Best or better aluminum electrolytic capacitor can stand about how much of a ripple current, the ESR is roughly how many, 220 v / 110 v direct rectification in a filter capacitor how big ripple current, when after the transformer step-down rectifier filter capacitor of ripple current, the frequency converter rectifier directly with three-phase 380 v when the ripple current on the filter capacitor, switch power supply have much high frequency transformation on the filter capacitor current, frequency converter and will have much high frequency transformation on the filter capacitor current,

  • Surface Mount Tantalum Capacitor Low ESR - SMD CA45L

    Contact Now Surface Mount Tantalum Capacitor Low ESR - SMD CA45L After the application of tantalum capacitors, aluminum electrolytic capacitor has been found to exist in the application of short service life, not resistant to high temperature (military requirements up to 125 ° C), the problem such as capacitance change with temperature is obvious, tantalum capacitor, forced people to seek the good performance of tantalum electrolytic capacitor is a kind of good performance of capacitors.Tantalum capacitors with solid and liquid two forms of the cathode.

  • Low ESR Aluminum Electrolytic Capacitor CD286

    Contact Now Low ESR Aluminum Electrolytic Capacitor CD286 Aluminum electrolytic capacitor (also called electrolytic capacitor) is how to achieve high electric capacity? First of all, to increase the plate area effectively, increase the plate in the electrolytic capacitor effective area method is that its anode aluminum foil corrosion is very rough, corrosion foil or tantalum metal powder caking structure to increase the surface area as possible, but only by increasing the positive surface area of the rough and metal anode in fact does not increase the plate effective area, only the cathode substrate as rough as the anode and the surface of the two electrodes is closely to realize effective increase of plate area, which in fact is not possible.