Follow us
Home > Products > Surface Mount Electrolytic Capacitors

Surface Mount Electrolytic Capacitors

  • 175℃ High Temperature Tantalum Capacitors CA501

    Contact Now 175℃ High Temperature Tantalum Capacitors CA501 175℃ High Temperature Tantalum Capacitors CA501 ● Silver case, gas seal, Cylindrical, Axial leads, High temperature sleeve, Polar ● Good electric performance, High reliability, long life, Low DF and LC. ● High temperature performance, Can use at 175 ℃ ● Suit for oil drilling deep well...

  • Axial Multilayer Ceramic Capacitors CC42 CT42

    Contact Now Axial Multilayer Ceramic Capacitors CC42 CT42 Structural characteristics With its multiple layers, the multilayer ceramic chip capacitor boasts nice resistance and it won’t be necessary to derate,the inductance is very low when in high frequency and it has non-polar equivalent series resistance....

  • Screw Terminal Aluminium Electrolytic Capacitors CD137

    Contact Now Screw Terminal Aluminium Electrolytic Capacitors CD137 Jinpei as a professional screw electrolytic capacitor manufacturers and over 30years of screw electrolytic capacitor experience, has always been committed to the capacitor field of high and new technology R&D, Jinpei actively contact clients in different areas, involved in instrument, LED, audio, power supply, electronic toys, security, digital camera, microelectronics, oil drilling, solar energy, new energy vehicles, communications, military spaceflight etc.

  • Metallized Polypropylene Film Capacitors CL21

    Contact Now Metallized Polypropylene Film Capacitors CL21 Metallized Polypropylene Film Capacitors CL21 SPECIFICATIONS Reference Standard:GB/T 7332 (IEC 60384-2) Climatic Category :55/105/21 Rated temperature:85℃ Operating temperature range: -55℃~105℃(+85℃ to +105 decreasing factor 1.25% per ℃ for VR(dc) Rated Voltage:50/63V, 100V, 250V, 400V, 630V...

  • Screw Super Capacitors

    Contact Now Screw Super Capacitors Screw super capacitors

  • Lugs Aluminum Electrolytic Capacitors CDIN

    Contact Now Lugs Aluminum Electrolytic Capacitors CDIN Lugs aluminum Electrolytic Capacitors CDIN Load life After applying rated voltage for 5000 hours at +85℃ and then resumed 16 hours: Capacitance change:±20% Initial measured value Leakage current: ≤Initial specified value Dissipation factor: ≤200% Initial specified value Shelf life After storage...

  • Axial Aluminum Electrolytic Capacitors CD95B

    Contact Now Axial Aluminum Electrolytic Capacitors CD95B Axial Aluminum Electrolytic Capacitors CD95B Axial Aluminum Electrolytic Capacitors CD95B.pdf

  • Snap-in Aluminium Electrolytic Capacitors CD294

    Contact Now Snap-in Aluminium Electrolytic Capacitors CD294 Snap-in electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.