Follow us
Home > Products > Screw Terminal Aluminum Electrolytic Capacitors

Screw Terminal Aluminum Electrolytic Capacitors

  • Polyropylene Film Foil Capacitors Non-Inductive CBB13

    Contact Now Polyropylene Film Foil Capacitors Non-Inductive CBB13 Polyropylene Film Foil Capacitors (Non-Inductive). CBB13 TYPICAL APPLICATIONS Widely used in high frequency, DC and pulse circuits SPECIFICATIONS Reference Standard:GB/T10188 (IEC 60384-13) Climatic Category :40/105/21 Rated temperature:85℃ Operating Temperature:-40℃~105℃(+85℃ to +105℃:decreasing...

  • High Voltage Tage Metallized Polypropylene Film Capacitors CBB81

    Contact Now High Voltage Tage Metallized Polypropylene Film Capacitors CBB81 High Voltage Tage Metallized Polypropylene Film Capacitors CBB81 SPECIFICATIONS Reference Standard:GB/T14579 (IEC 60384-17) Climatic Category:40/105/21 Rated temperature:85℃ Operating Temperature:-40℃~105℃(+85℃ to +105℃:decreasing factor 1.25% per ℃ for VR(DC)) Rated...

  • Metallized Polypropylene Film Capacitors CBB21

    Contact Now Metallized Polypropylene Film Capacitors CBB21 Metallized Polypropylene Film Capacitors CBB21 SPECIFICATIONS Reference Standard:GB/T14579 (IEC 60384-17) Climatic Category:40/105/21 Rated temperature: 85℃ Operating Temperature: -40℃~105℃(+85℃ to +105℃:decreasing factor 1.25% per ℃ for VR(DC)) Rated Voltage:...

  • Snap-in Aluminium Electrolytic Capacitors CD294

    Contact Now Snap-in Aluminium Electrolytic Capacitors CD294 Snap-in electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.

  • Radial Tantalum Capacitors CA42

    Contact Now Radial Tantalum Capacitors CA42 Radial Tantalum Capacitors CA42 ● CA42 Series are epoxy-coated solid electrolyte tantalum capacitors are encapsulated with flame-retardant yellow epoxy powder,marked with laser. ● CA42 meets and exceeds the requirements of IEC Specification 384–15-3, IECQ Speci- fication QC300201/US0003 and...

  • Coin Gold Super Capacitors EDLC SE-5R5155ZCHV

    Contact Now Coin Gold Super Capacitors EDLC SE-5R5155ZCHV Coin Super Capacitors(gold capacitors,ultra capacitors,EDLC) SE-5R5155ZCHV Rated voltage(V):5.5V (Standard charge model, then discharge To 0.1V at rated current; Repeat 20 time C = I△t/ △V, △V = 1.50 ~ 1.25V in the fifth discharge)

  • EDLC Gold Super Capacitors Module SM-5R5155ZL

    Contact Now EDLC Gold Super Capacitors Module SM-5R5155ZL Super Capacitors Module SM-5R5155ZL(gold capacitors,ultra capacitors,EDLC) Cycle life expectancy :After 100,000 times of cycles between U0 1/2U0 at RT,︱ △C/C︱≤30%,ESR≤4 times of specified ESR(25℃)