Follow us
Home > Products > DIP Tantalum Capacitors

DIP Tantalum Capacitors

  • AC Metallized Film Capacitors X1

    Contact Now AC Metallized Film Capacitors X1 Non-inductive winding type; small size; encapsulated in flame retardant plastic case; Its components are sealed with epoxy resin. Applied to sparkle-suppression circuits Applied to the mains of power switch. Service temperature...

  • Metallized Plastic Film Capacitors CJ40 CJ41 CJ48

    Contact Now Metallized Plastic Film Capacitors CJ40 CJ41 CJ48 Between the two leads-to withstand 1.5 times the rated voltage a minute,no flashover or breakdown; Leads to end with the shell can withstand between between 50Hz AC voltage: a,Rated voltage≤630V is 750V; b,Rated voltage >630V is 12.times of...

  • Snap-in Aluminium Electrolytic Capacitors CD296

    Contact Now Snap-in Aluminium Electrolytic Capacitors CD296 In the applications of rectifier power frequency filtering, the snap - in electrolytic capacitor due to its large capacity, high pressure and has an irreplaceable position.In power frequency rectifier filter applications, as a consumer, should pay attention to the snap - in electrolytic capacitr what about the performance?

  • Axial Aluminum Electrolytic Capacitors CD95B

    Contact Now Axial Aluminum Electrolytic Capacitors CD95B Axial Aluminum Electrolytic Capacitors CD95B Axial Aluminum Electrolytic Capacitors CD95B.pdf

  • Large Capacitance Super Capacitors

    Contact Now Large Capacitance Super Capacitors Large Capacitance Super Capacitors

  • Coin Gold Super Capacitors EDLC SE-5R5105ZCHV

    Contact Now Coin Gold Super Capacitors EDLC SE-5R5105ZCHV Coin Super Capacitors(gold capacitors,ultra capacitors,EDLC) SE-5R5105ZCHV (Standard charge model, then discharge To 0.1V at rated current; Repeat 20 time C = I△t/ △V, △V = 1.50 ~ 1.25V in the fifth discharge)

  • Power Mixture Tantalum Capacitor THC1

    Contact Now Power Mixture Tantalum Capacitor THC1 High Energy Tantalum Hybrid Capacitor power mixture tantalum capacitor THC1

  • Lug Aluminum Electrolytic Capacitors CDAWF

    Contact Now Lug Aluminum Electrolytic Capacitors CDAWF Lug aluminum Electrolytic Capacitors CDAWF Load life(+85℃) After applying rated voltage for 2000 hours at +85℃ and then resumed 16 hours: Capacitance change : ±15% Initial measured value Leakage current : ≤Initial specified value Dissipation factor :≤130% Initial specified value Shelf life(+85℃)...

  • Snap-in Aluminium Electrolytic Capacitors CD294

    Contact Now Snap-in Aluminium Electrolytic Capacitors CD294 Snap-in electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.

  • Surface Mount Tantalum Capacitor Low ESR - SMD CA45L

    Contact Now Surface Mount Tantalum Capacitor Low ESR - SMD CA45L After the application of tantalum capacitors, aluminum electrolytic capacitor has been found to exist in the application of short service life, not resistant to high temperature (military requirements up to 125 ° C), the problem such as capacitance change with temperature is obvious, tantalum capacitor, forced people to seek the good performance of tantalum electrolytic capacitor is a kind of good performance of capacitors.Tantalum capacitors with solid and liquid two forms of the cathode.