Follow us
Home > Products > Aluminium Electrolytic Capacitors suppliers

Aluminium Electrolytic Capacitors suppliers

  • EDLC Gold Super Capacitors Module SM-5R5-405UL

    Contact Now EDLC Gold Super Capacitors Module SM-5R5-405UL Super Capacitors Module SM-5R5-405UL(gold capacitors,ultra capacitors,EDLC) Cycle life expectancy:After 100,000 times of cycles between U0 1/2U0 at RT,︱ △C/C︱≤30%,ESR≤4 times of specified ESR(25℃)

  • Axial Metallized Polypropylene Film Capacitors CBB20

    Contact Now Axial Metallized Polypropylene Film Capacitors CBB20 Axial Metallized Polypropylene Film Capacitors CBB20 SPECIFICATIONS Reference Standard:GB/T10190 (IEC 60384-16) Climatic Category :40/105/21 Rated temperature: 85℃ Rated Voltage:100V,160V,250V,400V,630V,800V,1000V,1250V Capacitance Range:0.001μF ~ 15μF Capacitance Tolerance:±5%(J), ±10%(K),...

  • Motor Start Capacitors CD60

    Contact Now Motor Start Capacitors CD60 Motor Start Capacitors CD60 Dissipation factor(tgδ)(20℃,100Hz):tgδ≤0.08 Over-voltage:Applying 1.4 times rated voltage for 30 seconds Applying 1.2 times rated voltage for 2 minutes Shelf life:Make contact for 1 second,shut off 29 seconds,cycle 75000 times Make contact for 1 second,shut off 59...

  • Snap-in Aluminium Electrolytic Capacitors CD294

    Contact Now Snap-in Aluminium Electrolytic Capacitors CD294 Snap-in electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.

  • Axial Multilayer Ceramic Capacitors CC42 CT42

    Contact Now Axial Multilayer Ceramic Capacitors CC42 CT42 Structural characteristics With its multiple layers, the multilayer ceramic chip capacitor boasts nice resistance and it won’t be necessary to derate,the inductance is very low when in high frequency and it has non-polar equivalent series resistance....

  • Coin Gold Super Capacitors EDLC SE-5R5474ZCHV

    Contact Now Coin Gold Super Capacitors EDLC SE-5R5474ZCHV Coin Super Capacitors(gold capacitors,ultra capacitors,EDLC) SE-5R5474ZCHV (Standard charge model, then discharge To 0.1V at rated current; Repeat 20 time C = I△t/ △V, △V = 1.50 ~ 1.25V in the fifth discharge)

  • AC Motor Capacitors CBB60

    Contact Now AC Motor Capacitors CBB60 With a small loss,anti-moist,excellent electrical performance,reliability,large capacity,long life and good self-healing properties Typical Applications .It is widely used as the start-up and running capacitor that is special for micro water pump, cleaning...

  • Lug Or Screw Terminal Aluminium Electrolytic Capacitors CD92

    Contact Now Lug Or Screw Terminal Aluminium Electrolytic Capacitors CD92 Lug or terminal terminal electrolytic capacitor has the very high residual voltage after instantaneous short circuit, the usual explanation is that the dielectric absorption.If medium absorbing really so big, the influence of aluminum electrolytic capacitor frequency characteristic must be very poor, now even better than the real use of aluminum electrolytic capacitor is much worse, after all, low impedance frequency characteristics of the Snap-in electrolytic capacitor has done very well, and the latest polymer aluminum electrolytic capacitor frequency characteristic and even closer to the ceramic capacitor.Therefore, it can be said that aluminum electrolytic capacitor residual voltage is not generated by the dielectric absorption of p is another reason.So what reason be?The author thinks that is of special structure of aluminum electrolytic capacitor electrodes, which ^ so much residual voltage.

  • Axial Solid Tantalum Capacitors CA

    Contact Now Axial Solid Tantalum Capacitors CA Axial Solid Tantalum Capacitors CA

  • 175℃ High Temperature Tantalum Capacitors CA501

    Contact Now 175℃ High Temperature Tantalum Capacitors CA501 175℃ High Temperature Tantalum Capacitors CA501 ● Silver case, gas seal, Cylindrical, Axial leads, High temperature sleeve, Polar ● Good electric performance, High reliability, long life, Low DF and LC. ● High temperature performance, Can use at 175 ℃ ● Suit for oil drilling deep well...